KS file, floppy boot, and NIC not on boot floppy.

Peter Bowen pzb at datastacks.com
Thu Nov 21 09:00:10 EST 2002

On Thu, 2002-11-21 at 08:17, Henderson, TL Todd wrote:
> I suspect I have 4 options:
> a.)  Deal with it.
> b.)  Move the e1000 module to the floppy.  However, I don't seem to have the
> room on the floppy to do this.

The trick here is to remove one (or more) unneeded modules from the
floppy.  This requires playing with the modules.cgz file, along with a
couple other files that list the drivers on the floppy.

> c.)  Build a new kernel that fits on the floppy, has all the special
> features needed to boot from the floppy and includes the e1000 driver.
> d.)  Break down and learn how to do it with PXE.
> Is there anything I've missed or other suggestions anyone would have.

You might want to ask this on kickstart-list at redhat.com or
anaconda-list at redhat.com, as these are better places for this specific
issue, and have many people who have done this sort of thing before.


Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf

More information about the Beowulf mailing list