The following steps explain how load and start the Linux Hadoop Minimal Virtual Machine (LHM-VM) and download the training notes files. A full and expanded explanation is provided as part of the class.
If you are using Linux or Mac, a terminal application is available that includes and “ssh client.”
If you are using Windows, you will need an “ssh client.” Either of these listed below will work. They are both freely available at no cost. (MobaXterm is recommended)
See Linux Hadoop Minimal Installation Instructions for instructions on how to start the Linux Hadoop Minimal Virtual Machine (LHM-VM)
Open a terminal (using
MobaXterm on Windows) and enter the following to log in to the LHM-VM as user “hands-on” (password=“minimal”)
ssh [email protected] -p 2222
Once you are logged in to the LHM-VM, you should see the following prompt string:
[[email protected] ~]$
[[email protected] ~] will not be shown in the rest of the class documentation. A
$ will indicate the prompt string for input.
To download the Linux Command Line Quick Start training notes into the LHM-VM, pull down and extract the course files (from inside the LHM-VM) as shown below (copy the
wget line and paste it into the LHM-VM terminal):
$ wget --no-check-certificate https://www.clustermonkey.net/download/Hands-on_Hadoop_Spark/Linux-CL-Quick-Start-V1.0.tgz
The files can be extracted using the following command:
$ tar xvzf Linux-CL-Quick-Start-V1.0.tgz
Verify that you have extracted the Linux Command Line Quick Start course material:
$ ls Linux-CL-Quick-Start-V1.0 Linux-CL-Quick-Start-V1.0.tgz
These steps will be performed as part of the training.