====== Linux Command Line Quick Start ====== The following steps explain how load and start the Linux Hadoop Minimal Virtual Machine (LHM-VM) and download the training notes files. A full and expanded explanation is provided as part of the class. If you are using Linux or Mac, a terminal application is available that includes and "ssh client." If you are using Windows, you will need an "ssh client." Either of these listed below will work. They are both freely available at no cost. (MobaXterm is recommended) - [[http://www.putty.org| Putty]] - provides terminal for ssh session. - [[http://mobaxterm.mobatek.net|MobaXterm]] - provides terminal for ssh sessions and allows remote X Windows session. See [[Linux Hadoop Minimal Installation Instructions]] for instructions on how to start the Linux Hadoop Minimal Virtual Machine (LHM-VM) ==== When the VM is Started: ==== Open a terminal (using ''Putty'' or ''MobaXterm'' on Windows) and enter the following to log in to the LHM-VM as user "hands-on" (password="minimal") ssh hands-on@127.0.0.1 -p 2222 Once you are logged in to the LHM-VM, you should see the following prompt string: [hands-on@localhost ~]$ The ''[hands-on@localhost ~]'' will not be shown in the rest of the class documentation. A ''$'' will indicate the prompt string for input. To download the **Linux Command Line Quick Start** training notes into the LHM-VM, pull down and extract the course files (from inside the LHM-VM) as shown below (copy the ''wget'' line and paste it into the LHM-VM terminal): $ wget --no-check-certificate https://www.clustermonkey.net/download/Hands-on_Hadoop_Spark/Linux-CL-Quick-Start-V1.0.tgz The files can be extracted using the following command: $ tar xvzf Linux-CL-Quick-Start-V1.0.tgz Verify that you have extracted the **Linux Command Line Quick Start** course material: $ ls Linux-CL-Quick-Start-V1.0 Linux-CL-Quick-Start-V1.0.tgz These steps will be performed as part of the training.