Live On-Line Training:
Scalable Data Pipelines with Hadoop, Spark, and Kafka

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Beginning/Intermediate Linux Command Line Quick Start ======

The following steps explain how load and start the Linux Hadoop Minimal Virtual Machine (LHM-VM) and download the course notes files. A full and expanded explanation is provided as part of the class. The following steps are a "quick start." 

If you are using Linux or Mac, a terminal application is available that includes and "ssh client."

If you are using Windows, you will need an "ssh client." Either of these listed
below will work. They are both freely available at no cost. (MobaXterm is recommended)

  - [[http://www.putty.org| Putty]] - provides terminal for ssh session.
  - [[http://mobaxterm.mobatek.net|MobaXterm]] - provides terminal for ssh sessions and allows remote X Windows session.

See [[Linux Hadoop Minimal Installation Instructions]] for instructions on how to start the Linux Hadoop Minimal Virtual Machine (LHM-VM)

==== When the VM is Started: ====

Open a terminal (using ''Putty'' or ''MobaXterm'' on Windows) and enter the following to log in to the LHM-VM as user "hands-on"  (password="minimal")
<code>
  ssh hands-on@127.0.0.1 -p 2222
</code>

Once you are logged in to the LHM-VM, you should see the following prompt string:
<code>
  [hands-on@localhost ~]$
</code>

The ''[hands-on@localhost ~]'' will not be shown in the rest of the class documentation. A ''$'' will indicate the prompt string for input.

To download the **Beginning Command Line** class notes into the LHM-VM, pull down and extract the course files (from inside the LHM-VM) as shown below:
<code>
  $ wget --no-check-certificate https://www.clustermonkey.net/download/Hands-on_Hadoop_Spark/Begin-Linux-Command-Line-V1.1.tgz
  $ tar xvzf Begin-Linux-Command-Line-V1.1.tgz
</code>

If you need the class notes for the **Intermediate Command Line** class use the following:

<code>
  $ wget --no-check-certificate https://www.clustermonkey.net/download/Hands-on_Hadoop_Spark/Inter-Linux-Command-Line-V1.1.tgz
  $ tar xvzf Inter-Linux-Command-Line-V1.1.tgz
</code>

Verify that you have extracted the **Beginning Command Line** course material:
<code>
  $ ls
  Begin-Linux-Command-Line-V1.1  Begin-Linux-Command-Line-V1.1.tgz
</code>

For the **Intermediate Command Line** course your should see:
<code>
  $ ls
  Inter-Linux-Command-Line-V1.1  Inter-Linux-Command-Line-V1.1.tgz
</code>
These steps will be performed as part of the class.