cluster of AOD Opteron

[Mikhail Kuzminsky]

According to Curt Moore
> The RioWorks HDAMA (Arima) motherboard does have on-board sensors,
> adm1026 based. 
1) there is no information about environment monitoring chips
   in the HDAMA motherboard guide (at least in the guide we had)
2) sensors-detect utility (I used version from SuSe enterprise Linux
beta-version distribution) didn't find any monitoring chips at the testing
> Arima does have planned both a mini BMC which does just
> management type functions and also a full BMC with will do other neat
> things, I believe, such as KVM over LAN.  Below is a lm_sensors dump
> from an Arima HDAMA.
  It's good. But which lm_sensors version should be used and what are the
necessary settings for lm_sensors kernel modules (taking into account
that lm_sensors didn't find anything ) ?
> 
> adm1026-i2c-0-2c
> Adapter: SMBus AMD8111 adapter at 80e0
> Algorithm: Non-I2C SMBus adapter
> in0:       +1.15 V  (min =  +0.00 V, max =  +2.99 V)
> in1:       +1.59 V  (min =  +0.00 V, max =  +2.99 V)
> in2:       +1.57 V  (min =  +0.00 V, max =  +2.99 V)
> in3:       +1.19 V  (min =  +0.00 V, max =  +2.99 V)
> in4:       +1.18 V  (min =  +0.00 V, max =  +2.99 V)
> in5:       +1.14 V  (min =  +0.00 V, max =  +2.99 V)
> in6:       +1.24 V  (min =  +0.00 V, max =  +2.49 V)
> in7:       +1.59 V  (min =  +0.00 V, max =  +2.49 V)
> in8:       +0.00 V  (min =  +0.00 V, max =  +2.49 V)
> in9:       +0.45 V  (min =  +1.25 V, max =  +0.98 V)
> in10:      +2.70 V  (min =  +0.00 V, max =  +3.98 V)
> in11:      +3.33 V  (min =  +0.00 V, max =  +4.42 V)
> in12:      +3.38 V  (min =  +0.00 V, max =  +4.42 V)
> in13:      +5.12 V  (min =  +0.00 V, max =  +6.63 V)
> in14:      +1.57 V  (min =  +0.00 V, max =  +2.99 V)
> in15:     +11.88 V  (min =  +0.00 V, max = +15.94 V)
> in16:     -12.03 V  (min =  +2.43 V, max = -16.00 V)
> fan0:        0 RPM  (min =    0 RPM, div = 2)
> fan1:        0 RPM  (min =    0 RPM, div = 2)
> fan2:        0 RPM  (min =    0 RPM, div = 2)
> fan3:        0 RPM  (min =    0 RPM, div = 2)
> fan4:        0 RPM  (min =    0 RPM, div = 1)
> fan5:        0 RPM  (min =    0 RPM, div = 1)
> fan6:       -1 RPM  (min =    0 RPM, div = 1)
> fan7:       -1 RPM  (min =    0 RPM, div = 1)
> temp1:       +37?C  (min = -128?C, max =  +80?C)
> temp2:       +46?C  (min = -128?C, max = +100?C)
> temp3:       +46?C  (min = -128?C, max = +100?C)
> vid:      +1.850 V    (VRM Version  9.1)
> 
  Sorry, what does it means ? adm1026 has no enough possibilities
to measure the values (in this case only 3 temperatures but
no any RPM value) or lm_sensors version don't work correctly ?

Mikhail Kuzminsky
Zelinsky Institute of Organic Chemistry
Moscow

_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf