[Beowulf] building Infiniband 4x cluster questions

Vincent Diepeveen diep at xs4all.nl
Mon Nov 7 12:26:41 EST 2011

Thanks for the very clear explanation Gilad!

You beated with just 2 lines entire wiki and lots of other homepages  
with endless of chatter :)

On Nov 7, 2011, at 6:19 PM, Gilad Shainer wrote:

>> hi John,
>> I had read already about subnet manager but i don't really  
>> understand this,
>> except when it's only configuration tool.
>> I assume it's not something that's critical in terms of bandwidth,  
>> it doesn't
>> need nonstop bandwidth from the machine & switch is it?
> The subnet management is just an agent in the fabric that give  
> identifiers to the ports and set the routing in the fabric (in case  
> of static routing). It will also discover new nodes once connected  
> to the fabric, or nodes that went down (in the later case, it can  
> modify the routing accordingly). The agent requires negligible  
> network resources, so no need to worry.  You can run the subnet  
> management from a server (head node for example using OpenSM for  
> example) or from one of the switches.
> Gilad

Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf

This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

More information about the Beowulf mailing list