[Beowulf] hardware RAID versus mdadm versus LVM-striping
gerry.creager at tamu.edu
Sun Jan 17 23:24:51 EST 2010
Hardware RAID, in my experience, works well with most LSI controllers
(that haven't been modified to become Dell PERC controllers) and 3Ware
controllers. I've had pretty grim results with most others. A
colleague and I had great initial results with several ARECA
controllers, but then they lost their minds and did strange things to
our RAID'd volumes. Different Linux distro's and no operator
intervention at the times of failure, either.
Hardware RAID should use a real onboard controller and be real hardware
RAID. A lot of 'em use a "driver" which relies on the OS to actually do
the RAID but with some proprietary bits that I don't know and can't see
when they break. In this case I'd rather use MD s/w RAID. That said,
if I can use a current 3Ware or LSI card (note caveat above; I've not
had good performance with any PERC's) I'd rather do hardware RAID for
simplicity and recoverability.
But, you have to do your own due diligence and know your hardware.
Alan Louis Scheinine wrote:
> I had a nightmare problem with a newly compiled kernel not booting.
> The problem may have been with the command mkblkdevs of nash but in
> any case I did extensive web search on the AHCI controller that I had
> in both a notebook and a desktop computer, both of which had the
> booting problem.
> One example of the controller is
> Intel ICH9M-E/M SATA AHCI Controller
> In web postings there were many problems attributed to this controller.
> It does RAID 1 using software. The Linux driver was (is?) a "work in
> from what I gather reading web postings.
> Dr. A.J. Travis wrote:
>> The problem with using an on-board RAID controller is that many of
> > these are 'host' RAID (i.e. need a Windows driver to do the RAID)
> > in which case you are using the CPU anyway, and they also use
> > proprietary formats.
> My point is to underline this fact. Hardware RAID 1 should be simple and
> reliable. But when the RAID controller relies on software running on the
> O/S, then it might be better to use Linux software RAID.
Gerry Creager -- gerry.creager at tamu.edu
Texas Mesonet -- AATLT, Texas A&M University
Cell: 979.229.5301 Office: 979.458.4020 FAX: 979.862.3983
Office: 1700 Research Parkway Ste 160, TAMU, College Station, TX 77843
Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf