[Beowulf] hardware RAID versus mdadm versus LVM-striping
landman at scalableinformatics.com
Sun Jan 17 22:58:23 EST 2010
Rahul Nabar wrote:
> On Sun, Jan 17, 2010 at 9:36 PM, Joe Landman
> <landman at scalableinformatics.com> wrote:
>> Ohhh ... it depends. Some of the "vendors" hardware raid ... heck ... most
>> of it ... is rebadged LSI gear. Usually their lower end stuff which is
>> sometimes fake-raid. Use fake-raid only if no other options exist.
> Thanks Joe! What's "fake RAID"? Just a bad implementation or...........?
Its a software RAID implementation pretending to be a hardware RAID
implementation. They are rarely if ever as good as MD. Many of them in
Linux will invoke dm (the "other" RAID engine) as dm has "support" for
fake-raid. Note that we have lost data (multiple times) with
dm+fake-raid in testing, so we don't recommend its use in important
machines (ones which you can't afford to lose). This could be due to
bad drivers for the chips in question, but we aren't taking chances.
>> LVM is not a performance tool. Use it to help you manage things, not speed
> I had thought so. But why then does LVM have features like striping if
> not for performance? Or are they just not so good?
LVM doesn't perform as well as MD RAID for performance. You can use it,
just be advised that you are leaving a great deal of performance on the
table if you do so.
Joseph Landman, Ph.D
Founder and CEO
Scalable Informatics, Inc.
email: landman at scalableinformatics.com
web : http://scalableinformatics.com
phone: +1 734 786 8423 x121
fax : +1 866 888 3112
cell : +1 734 612 4615
Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf