[Beowulf] Beowulf Storage Node

[Matt Lawrence]

On Sat, 11 Apr 2009, Залетнев Дмитрий wrote:

> I have a motherboard with 4x SATAII-ports and without RAID. If I'll 
> connect to these ports 4 identical SATAII 250 GB 7200 rpm HDDs and 
> install Linux, is it possible to have software RAID 0 using Linux?

Sure it is.  The only issue you may run into is that the partition 
containing /boot can't be on software RAID, grub & lilo don't know how to 
deal with RAID partitions.  My solution has been to put /boot on Compact 
Flash that is plugged into the motherboard IDE connector via a $5 adapter 
card.

-- Matt
It's not what I know that counts.
It's what I can remember in time to use.
-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

-------------- next part --------------
_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf