[Beowulf] Green Cluster?

Perry E. Metzger perry at piermont.com
Mon Jul 21 09:19:24 EDT 2008

stephen mulcahy <smulcahy at aplpi.com> writes:
> We can reset the WOL flags and re-enable it on individual nodes, but
> unfortunately when the nodes are power-cycled, the WOL flag goes back
> to its default (off) state. Given the typical use case of WOL, it
> seems unfortunate that a power cycle resets it.

You might try the following:

Take a machine with the flag off. Dump /dev/cmos. Change ONLY the flag
in the BIOS, again dump /dev/cmos, and see if you can find where the
flag resides. You can then build a hackish script to set the flag on
machine boot.

Perry E. Metzger		perry at piermont.com
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf

More information about the Beowulf mailing list