[Beowulf] Multiple NIC on a node

[Nathan Moore]

Hi,

I've aquired a few clusternodes that have multiple ethernet jacks.  One the
system-config-network applet I see several different adaptors (eg eth0 and
eth1).  Right now, I've got a many more free ports on my switch than I have
nodes in my cluster, so I'm wondering if there's some performance benefit
from hooking up the second NIC.

Do any of you have a tutorial on multiple NIC's per compute node that you'd
be willing to share?  I'm assigning static IP's with named, and cocurrently
maintaining /etc/hosts files on each machine with the full cluster map.  Do
I "just" assign a secon IP address for the second eth1 jack?  Is there more
to it?

Nathan Moore

-- 
- - - - - - -   - - - - - - -   - - - - - - -
Nathan Moore
Assistant Professor, Physics
Winona State University
AIM: nmoorewsu
- - - - - - -   - - - - - - -   - - - - - - -


!DSPAM:4782aad1147387511819938!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.clustermonkey.net/pipermail/beowulf/attachments/20080107/8c4ffa93/attachment-0001.html>
-------------- next part --------------
_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf


!DSPAM:4782aad1147387511819938!