Data corruption w/ tg3 and bcm5700 drivers

[Mark Andrew Smith]

May I ask what motherboards (and possibly BIOS) are you using?

Cheers,
	Mark.

-----Original Message-----
From: beowulf-admin at scyld.com [mailto:beowulf-admin at scyld.com]On Behalf
Of Bryan K. Wright
Sent: 12 June 2003 21:21
To: beowulf at beowulf.org
Cc: bryan at ayesha.phys.Virginia.EDU
Subject: Re: Data corruption w/ tg3 and bcm5700 drivers


Hi folks,

	(A recap for those who weren't tuned in earlier:  I've been
having data-corruption problems with Broadcom-based 3com Gigabit cards.)

	Here's an interesting new datum:
The cards were previously in a 64-bit PCI slot, but they'll also work
in a 32-bit slot.  Moving them to the 32-bit slot apparently gets rid
of the data corruption problem (we're currently using the bcm5700 driver.)

						Bryan
--
============================================================================
===
Bryan Wright                |"If you take cranberries and stew them like
Physics Department          | applesauce, they taste much more like prunes
University of Virginia      | than rhubarb does."  --  Groucho
Charlottesville, VA  22901  |
(434) 924-7218              |         bryan at virginia.edu
============================================================================
===


_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit
http://www.beowulf.org/mailman/listinfo/beowulf


This email has been scanned for viruses by NetBenefit using Sophos
anti-virus technology




This email has been scanned for viruses by NetBenefit using Sophos anti-virus technology


_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf