<br>I am using Dell RAID controller PERC 6/E connected to a 1TB x10 array (9 disks for RAID 5, 1 disk for hotspare), it takes about 7 hour to finish initialization operation. There is another option 'Fast Init', it takes only serveral minites. What's the difference between these two operation?<br>
Just now I performed 'Fast Init' and began to install rockscluster 5.0, the raid was partitioned as one single ext3 partition. Then the system began to format the partition, it also took about 7 hr...<br><br>Best Regards,<br>
Jin Yao<br>
<br />--
<br />This message has been scanned for viruses and
<br />dangerous content by
<a href="http://www.mailscanner.info/"><b>MailScanner</b></a>, and is
<br />believed to be clean.