[Beowulf] Advice on 4 CPU node configurations
stuartb at 4gh.net
Thu Feb 10 13:52:52 EST 2011
On Wed, 9 Feb 2011 at 09:38 -0000, Prentice Bisbal wrote:
> About 6 months ago, I purchased a couple of Dell PowerEdge R815s
> with 128 GB of RAM and 32 cores. We looked at similar RAM
> configurations a couple of years ago. and the cost premium for that
> much RAM was prohibitive (the price for additional RAM seemed to go
> up exponentially with the amount of RAM) so we stayed at 32 GB.
> This time around, the premium for the additional RAM seemed
> marginal. Not sure how large you can go and keep that "marginal"
> relationship, but it's much larger than it was a couple of years
How much does the RAM speed matter to people?
We have a lot of 2 CPU (8 core) systems and have been considering
memory upgrades (or just purchasing new systems with more memory since
we are still growing).
Currently we are running 1 4GB DIMM per channel at 1333 MHz. If we
add a second 4GB DIMM per channel then the memory will run at 1066 MHz
(and to 800 MHz with 3 DIMMs per channel). Alternatively, we could
replace the 4GB modules with 8GB ones (keeping the old ones for spares
or to side-grade some other machines to 48GB/1066 MHz).
Have people been worrying about the lower memory bus rate with
multiple DIMMs on each channel? Do "ordinary" applications notice the
I know it depends upon the application and I have no idea if this will
matter to our applications. Mostly, I just happy things are running
at all rather than fighting every ounce of performance.
I've never been lost; I was once bewildered for three days, but never lost!
-- Daniel Boone
Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
More information about the Beowulf