[Beowulf] Advice on 4 CPU node configurations
prentice at ias.edu
Thu Feb 3 09:42:18 EST 2011
Hearns, John wrote:
>> We are designing a new HPC system for our lab. We are shifting ideas
>> around (our budget is of 30K euro).
30K EUR won't get you much, especially if you have to by IB or 10 GbE
networking hardware. For that little money, I would recommend buying a
4-socket server with 8- or 12-core CPUs, and load it up with as much RAM
as possible. You might be able to by 2 or 3, depending on how much you
max them out.
If you go this route, make sure it has redundant disks, power supplies
and all this, since you won't have inherent redunancy of duplicate
I recently ordered a couple of Dell PowerEdge R815s with 32-cores (4
sockets) and 128 GB of RAM, and my users have been flocking to them.
Unfortunately, one of these servers keeps reporting SBEs since October
and that still hasn't resolved to my satisfaction (documented elsewhere
on this list), so I wouldn't recommend that particular model.
Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
More information about the Beowulf