[Beowulf] HP 10 GbE card use/warranty
Eric W. Biederman
ebiederm at xmission.com
Wed Mar 31 08:23:27 EDT 2010
Steve Cousins <cousins at umit.maine.edu> writes:
>>>> I installed
>>>> one of the supported distributions (or close enough): CentOS 5. Driver
>>>> installation went fine and I was able to get one of the cards to work. The other
>>>> one seems to be bad. The nx_nic driver loads but no eth2 device shows up. Also,
>>>> the Activity LED is constant but no Link LED lights up. Since I can't get the
>>>> eth device loaded I can't update the firmware.
>> Does fedora not build the in kernel driver? They should.
> Yes it does. I got basic functionality with it but under large transfers it
> locks up. No lockups with the nx_nic driver.
You might want to work with the maintainers of the netxen driver in
the kernel. That have been fairly responsive when I have worked with
Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf