[Beowulf] 1000baseT NIC and PXE?

Gregory Matthews greg.matthews at diamond.ac.uk
Wed Mar 17 05:54:05 EDT 2010


David Mathog wrote:
> Let's turn this question around a bit.  Can anyone suggest a specific
> inexpensive 1000baseT card which provides PXE and is otherwise reliable
> and fast?  That is, one that you have personally used to boot a machine
> into your cluster.  Similarly, the names of any models that should be
> avoided would also be useful information.

we have had many problems with the Intel NICs that come embedded on the 
supermicro twin boards when paired with nortel switches. Setting the MTU 
to anything other than 1500 results in cards coming up in a strange 
state 50% of the time. Also, PXE has been a problem with certain 
versions of the driver not to mention the extra confusion over e1000 and 
e1000e.

These report themselves as:

Ethernet controller: Intel Corporation 80003ES2LAN Gigabit Ethernet 
Controller (Copper) (rev 01)

GREG

> 
> Thanks,
> 
> David Mathog
> mathog at caltech.edu
> Manager, Sequence Analysis Facility, Biology Division, Caltech
> _______________________________________________
> Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
> To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
> 


-- 
Greg Matthews            01235 778658
Senior Computer Systems Administrator
Diamond Light Source, Oxfordshire, UK
_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list