[Beowulf] copying data between clusters
landman at scalableinformatics.com
Fri Mar 5 11:00:03 EST 2010
Michael Di Domenico wrote:
> How does one copy large (20TB) amounts of data from one cluster to another?
> Assuming that each node in the cluster can only do about 30MB/sec
> between clusters and i want to preserve the uid/gid/timestamps, etc
> I know how i do it, but i'm curious what methods other people use...
I am biased of course, but Fedex-net with one of these:
1GB @ 30 MB/s is about 33s. 1TB @ 30 MB/s is about 33000s. Or more
than 1/3 of a day. 20TB @ 30 MB/s ... you are looking at ~7 days to write.
If you have a 1GB/s disk write speed (less than the above unit can do),
1TB takes ~1000s, 20TB takes 20000s, about 1/4 of a day.
If the clusters are close enough (same data center) this could be a
shared storage but you will need a fast network between them. If the
clusters are far enough to avoid direct connection, chances are 30 MB/s
may be optimistic on getting data between them.
BTW: 30 MB/s sounds suspiciously like either a) 1GbE sustained NFS speed
for some nodes or b) the speed of an IDE drive.
> Just a general survey...
> Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
> To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
Joseph Landman, Ph.D
Founder and CEO
Scalable Informatics, Inc.
email: landman at scalableinformatics.com
web : http://scalableinformatics.com
phone: +1 734 786 8423 x121
fax : +1 866 888 3112
cell : +1 734 612 4615
Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf