[Beowulf] Spanning Tree Protocol and latency: allowing loops in switching networks for minimizing switch hops

Rahul Nabar rpnabar at gmail.com
Tue Feb 23 14:23:59 EST 2010


Over the years I have scrupulously adhered to the conventional wisdom
that "spanning tree" is turned off on HPC switches. So that protocols
don't time out in the time STP needs to acquire its model of network
topology. But that does assume that there are no loops in the switch
connectivity that can cause broadcast storms etc. Thereby constraining
the network design to a loopless configuration. Most cases this is
fine but.....

In the interest of latency minimum switch hops make sense and for that
loops might sometimes provide the best solution. Just wondering what
people think. Does STP enabled have other drawbacks aside from the
initial lag on port activation? Or maybe all the latency advantage is
always wiped out if the STP being on itself has some massive overhead.

Do you always configure switches to not have loops? Or are loops ok
and then I turn STP ON but just use PortFast to get away with the best
of both worlds.

-- 
Rahul
_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list