[Beowulf] case (de)construction question

David Mathog mathog at caltech.edu
Fri Feb 19 18:43:39 EST 2010


Many rack cases have threaded standoff's directly attached to the case
metal.  On the outside of the case one sees a hexagonal nut, and on the
inside the cylindrical standoff - with no sign of the hexagonal nut.  We
even have one type of case with a removable motherboard tray, which is
quite thin, and even here this type of standoff is employed.

The question is, how are these things put together, and more
specifically, how are they to be taken apart?  Some of the standoffs are
in the way of a larger power supply that needs to go into one of these
cases. Is there a more elegant way of removing these than by grinding
them off or drilling them out?  I have already tried unscrewing one, on
the theory the standoff might be threaded into the hex nut, but it
wouldn't budge.

Thanks,
 
David Mathog
mathog at caltech.edu
Manager, Sequence Analysis Facility, Biology Division, Caltech
_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list