[Beowulf] UPS signaling scripts?
David N. Lombard
dnlombar at ichips.intel.com
Mon Feb 8 16:32:44 EST 2010
On Mon, Feb 08, 2010 at 01:05:52PM -0800, Gerald Creager wrote:
> Looking for a usable script that will allow me to listen to an APC data
> center UPS and power down a cluster when we go to UPS power. Anyone got
> a solution? My last experience with PowerChute was pretty sad, I'm afraid.
$ yum info apcupsd
Loaded plugins: refresh-packagekit
Name : apcupsd
Arch : x86_64
Version : 3.14.8
Release : 1.fc12
Size : 283 k
Repo : updates
Summary : APC UPS Power Control Daemon for Linux
URL : http://www.apcupsd.com
License : GPLv2
Description: Apcupsd can be used for controlling most APC UPSes. During a
: power failure, apcupsd will inform the users about the power
: failure and that a shutdown may occur. If power is not restored,
: a system shutdown will follow when the battery is exausted, a
: timeout (seconds) expires, or the battery runtime expires based
: on internal APC calculations determined by power consumption
: rates. If the power is restored before one of the above shutdown
: conditions is met, apcupsd will inform users about this fact.
: Some features depend on what UPS model you have (simple or smart).
David N. Lombard, Intel, Irvine, CA
I do not speak for Intel Corporation; all comments are strictly my own.
Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf