[Beowulf] Some beginner's questions on cluster setup
dzaletnev at yandex.ru
Thu Jul 9 21:21:12 EDT 2009
I've read your message about Jesswolf from mailing list. And i've a question: i've a small training-purposes installation of PC running Linux and two SonyPS3 running CentOS-base YDL 6.1 or Fedora 11 connected through Gigabit AT unmanaged swith. Is Jesswulf a crossplatform solution? I've encountered difficulties in building OpenFOAM on them from sources - the main trouble is gcc for ppc ver. 4.1 when OpenFOAM wants 4.2 min, and there's something that prevent OpenFOAM from running resulting binaries for ppc platform.
I'd like to try on this installation diskless setup, but not sure that PS3 support such features, however it has USB and two network interfaces: GLAN and WLAN.
That's my training "clussroom" in cluster technologies and I'm not sure that some CFD-software in which I'm interested for my postgraduate studies support ppc64/cbea architecture.
My professor told me that my PS3's and nVidia G80 and Crossplatform .Net are "the day after tommorow", and recommended me work with mass-market solutions and MPI but i'm going on with an idea of heterogenious home cluster.
There are two reasons preventing me of using Rapidmind API: they do not support OS's that work with PS3 firmware rev.2.70 and they do not answer on my e-mails, so I cannot knew their pricing.
Thanks in advance,
PS The only distros that i encounted to work with my PS3 firmware rev.2.70 are Fedora 11 ppc, YellowDog 6.1 (new), Ubuntu 8.10 PS3 Server. The previous releases do not install, Debian Lennie ppc also.
> The diskless provisioning system is definitely the way to go. We use the
> cluster toolkit called, Jesswulf, which is available at
> By default it runs on RedHat/Centos/Fedora systems, though it has been
> ported to Ubuntu and SuSE without too much trouble. Perseus/Warewulf
> also work well. We also teach cluster courses, which may be helpful.
> To answer some of your questions, I prefer the read-only NFSROOT
> approach with a small (less than 20 MB ramdisk). We use this on all of
> our clusters (about 7 clusters) and it works fine. We even use it on
> heterogeneous systems. One cluster has a mix of P4 Xeons, dual-core
> Opterons, and quad-core Xeons all using the same NFSROOT so you simply
> update one directory on the master node and *all* of the compute nodes
> have the new software. We love it! We simply either compile the kernel
> or make the initrd with hardware support for all of the nodes. We often
> use different hardware for the master and compute nodes, without issue.
> The only thing that we don't mix is 32 and 64-bit. We have a couple of
> 32-bit clusters and the rest are 64-bit.
> The main issue that you need to deal with is having a fast enough
> storage system for parallel jobs that generate a lot of data. We use the
> local hard drives in the computes nodes for "scratch" space and we have
> some type of shared file system. On the small clusters, we use NFS, but
> on the bigger clusters we use Glusterfs with Infiniband, which has
> proven to be very nice. If you are running MPI jobs with lots of data,
> you might want to consider adding Infiniband. Even the cheap ($125)
> Infiniband cards give much better performance than standard Gigabit. And
> you can always run IP over IB for applications or services that need
> standard IP.
> You mention that you don't think that you will have too much MPI
> traffic, but that you will be copying the results back to the master.
> This is when we see the highest load on our NFS file systems when all of
> the compute nodes are writing at the same time, even on small clusters
> (less than 20 nodes). We've found that a clustered file system like
> Glusterfs provides very low I/O wait load when copying lots of files
> compared to NFS. You may consider picking up some of the cheap IB cards
> ($125) and switches ($750 for 8-ports/$2400 for 24-ports) in order to do
> some relatively inexpensive testing. Here is one place where you can
> find them:
> I'd be happy to talk to you. My phone number is below and you have my
> Jess Cannata
> Advanced Research Computing &
> High Performance Computing Training
> Georgetown University
> P.R. wrote:
> > Hi,
> > Im new to the list & also to cluster technology in general.
> > Im planning on building a small 20+node cluster, and I have some basic
> > questions.
> > We're planning on running 5-6 motherboards with quad-core amd 3.0GHz
> > phenoms, and 4GB of RAM per node.
> > Off the bat, does this sound like a reasonable setup
> > My first question is about node file&operating systems:
> > I'd like to go with a diskless setup, preferably using an NFS root for each
> > node.
> > However, based on some of the testing Ive done, running the nodes off of the
> > NFS share(s) has turned out to be rather slow & quirky.
> > Our master node will be running on a completely different hardware setup
> > than the slaves, so I *believe* it will make it more complicated & tedious
> > to setup&update the nfsroots for all of the nodes (since its not simply a
> > matter of 'cloning' the master's setup&config).
> > Is there any truth to this, am I way off?
> > Can anyone provide any general advice or feedback on how to best setup a
> > diskless node?
> > The alternative that I was considering was using (4GB?) USB flash drives to
> > drive a full-blown,local OS install on each node...
> > Q: does anyone have experience running a node off of a usb flash drive?
> > If so, what are some of the pros/cons/issues associated with this type of
> > setup?
> > My next question(s) is regarding network setup.
> > Each motherboard has an integrated gigabit nic.
> > Q: should we be running 2 gigabit NICs per motherboard instead of one?
> > Is there a 'rule-of-thumb' when it comes to sizing the network requirements?
> > (i.e.,'one NIC per 1-2 processor cores'...)
> > Also, we were planning on plugging EVERYTHING into one big (unmanaged)
> > gigabit switch.
> > However, I read somewhere on the net where another cluster was physically
> > separating NFS & MPI traffic on two separate gigabit switches.
> > Any thoughts as to whether we should implement two switches, or should we be
> > ok with only 1 switch?
> > Notes:
> > The application we'll be running is NOAA's wavewatch3, in case anyone has
> > any experience with it.
> > It will utilize a fair amount of NFS traffic (each node must read a common
> > set of data at periodic intervals),
> > and I *believe* that the MPI traffic is not extremely heavy or constant
> > (i.e., nodes do large amounts of independent processing before sending
> > results back to master).
> > Id appreciate any help or feedback anyone would be willing&able to offer...
> > Thanks,
> > P.Romero
> > _______________________________________________
> > Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
> > To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
> Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
> To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
Новая почта пришла http://mail.yandex.ru/promo/neo/welcome/sign
Beowulf mailing list, Beowulf at beowulf.org sponsored by Penguin Computing
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf