[Beowulf] Re: What is the right lubricant for computer rack sliding rails?

Robert G. Brown rgb at phy.duke.edu
Fri Feb 6 15:12:48 EST 2009


On Fri, 6 Feb 2009, Bob Drzyzgula wrote:

> they are likely to be extremely budget-challenged. I also
> think that if he's seeing binding with ball-bearing rails,
> the racks, as Gus suspects, are in very bad shape, and
> those may need to be replaced -- or at least carefully
> realligned -- as well before the problem will go away
> completely.

Absolutely.  A heavy hammer or some work with a rachet set will often do
it.  This is a "common" problem (especially for racks you assemble
yourself), and it is worth the time to really fix it.  A tape measure to
check the diagonals of the rectangles can really help.

    rgb

>
> --Bob
>
> _______________________________________________
> Beowulf mailing list, Beowulf at beowulf.org
> To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
>

Robert G. Brown	                       http://www.phy.duke.edu/~rgb/
Duke University Dept. of Physics, Box 90305
Durham, N.C. 27708-0305
Phone: 1-919-660-2567  Fax: 919-660-2525     email:rgb at phy.duke.edu


_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.



More information about the Beowulf mailing list