[Beowulf] Re: Purdue Supercomputer - labeling Cables

Gerry Creager gerry.creager at tamu.edu
Sun May 11 23:14:51 EDT 2008


Maurice Hilarius wrote:
> David Mathog <mathog at caltech.edu> wrote:
>> What about labeling the cables?  My rack's nodes' ethernet and power
>> cables are marked with the node's name at each end.  It was a low tech
>> approach involving printing names, cutting paper into strips with
>> scissors, and taping them on.  There are other types of label, many
>> based on modified zip ties, but they still have to be applied by hand.  
>>   
> White shrink tube works very well. Is secure, and does not project or 
> snag on things.
> One may pre-write it.
> Only downside is it has to be slipped over an end, so one has to pull 
> the end out of a socket to apply.

I did this years ago when I was making all my cat5 cables (be the first 
kid on YOUR block with all 100BaseT connections...) but that's been a 
long time.  Self laminating labels work pretty well, and Brady has 
several types to choose from.  If you have the connectors already on the 
cables, I don't see this as a self-starter.

gerry
-- 
Gerry Creager -- gerry.creager at tamu.edu
Texas Mesonet -- AATLT, Texas A&M University	
Cell: 979.229.5301 Office: 979.458.4020 FAX: 979.862.3983
Office: 1700 Research Parkway Ste 160, TAMU, College Station, TX 77843
_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf

!DSPAM:4827b68982427511819938!



More information about the Beowulf mailing list