[Beowulf]Infrastruture planning for small HPC 40/100 gigabyet eyhernet or Infiniband?
eugen at leitl.org
Sun Jul 27 15:28:07 EDT 2008
On Sat, Jul 26, 2008 at 09:15:23PM -0700, Nifty niftyompi Mitch wrote:
> Did I read this correctly?
> Are you cutting holes in the walls of a home.....?
Real homes have cable ducts -- I'm limited to drilling through walls.
Unfortunately, due to lousy electric installation I'm stuck with
severe ground loop issues (I catched that too late orelse
I would have put in a heavy ground wire strung along the CAT 6/7).
Galvanic separation would be a god-send -- but for the price
tag, and unavailability of GBit polymer optical.
> It seems to me that today's 'exotic' links should be confined
> to the machine room/ data closet. Consider the current
> maximum length of Infiniband DDR over Cu ....
It's a home installation, not an unobtainium interconnect.
> After that you can look at end point bandwidth to an office or
> entertainment room. It is not hard or expensive to pull high quality
> TV coax which can support multiple HDTV links and multiple cat6 for
> trunked data links leaving the machine room.
CAT 6 is great, except if you see sparks when plugging in RJ-45s.
Also, most systems tend to shutdown spontaneously overnight when
on such dirty network.
> Also all wires in the wall MUST be safety rated for such use.
Eugen* Leitl <a href="http://leitl.org">leitl</a> http://leitl.org
ICBM: 48.07100, 11.36820 http://www.ativel.com http://postbiota.org
8B29F6BE: 099D 78BA 2FD3 B014 B08A 7779 75B0 2443 8B29 F6BE
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf