[Beowulf] Drive screw fixed with LocTite
Perry E. Metzger
perry at piermont.com
Wed Jul 23 21:09:54 EDT 2008
"David Mathog" <mathog at caltech.edu> writes:
> A vendor who shall remain nameless graced us with a hot swappable drive
> caddy in which one of the three mounting screws used to fasten the drive
> to the caddy had been treated with blue LocTite. This wasn't obvious
> from external inspection, but the telltale blue glop was on the threads
> when the screw finally let go and came out. It was beginning to look
> like power tools were going to be needed to get it out, and the screw
> head was pretty badly torn up after removal.
I believe a touch from a soldering iron will usually loosen LocTite,
but that might also damage a drive, so be careful.
> This is the first time I have encountered a drive screw on a removable
> drive which was, well, unremovable. Is this a trend or are we just
> dealing with a sadistic assembler?
I've never seen it used with a drive, it is certainly not normal.
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf