[Beowulf] software for compatible with a cluster

H.Vidal, Jr. hvidal at tesseract-tech.com
Thu Jul 3 08:43:35 EDT 2008


In my experience with 3D, the renderer is of particular note.
For example, it is entirely possible to model with one piece
of software, export geometry, and render with another piece
of software. And the production team will probably have very
specific ideas of which renderer is what they want, especially
since tools such as RenderMan are themselves programmable, and
cannot just be 'switched' with another rendering tool.

And so, based on your questions, it sounds like you really need
to study, understand, and educate yourself on your proposed product
or service before thinking about batch rendering. You are,
as Americans would say, putting the cart before the horse.

So, as suggested, go study the 'front end' of the problem in much
greater detail, talk to potential customers, understand more
what you are intending to do, then come back and find out about
clusters. The Beowulf mailing list has lots of archived comments
and questions on this topic. That's a hint.....

If you are just acting as a hobbyist or moving along a learning
curve, go look at open source rendering tools. If you are going
to sell services on open source rendering tools, see comments
above. In any case, google and plain reading are your friends....

Good luck.

hv

Jon Aquilina wrote:
> now what happens if someone comes to me for rendering services and they 
> used maya will the maya file be able to use the software mentioned above 
> or would i need some other software for that?
> 
> On 7/2/08, *Bernard Li* <bernard at vanhpc.org <mailto:bernard at vanhpc.org>> 
> wrote:
> 
>     On Wed, Jul 2, 2008 at 4:32 AM, Perry E. Metzger <perry at piermont.com
>     <mailto:perry at piermont.com>> wrote:
> 
>      > "Jon Aquilina" <eagles051387 at gmail.com
>     <mailto:eagles051387 at gmail.com>> writes:
>      >> if i use blender how nicely does it work in a cluster?
>      >
>      > I believe it works quite well.
> 
>     As far as I know blender does not have any built-in "clustering"
>     capabilities.  But what you do is render different frames on different
>     cores (embarrassingly parallel) using a queuing/scheduling system.
>     DrQueue seems to be quite popular with the rendering folks:
> 
>     http://drqueue.org/cwebsite/
> 
>     Cheers,
> 
>     Bernard
> 
> 
> 
> 
> -- 
> Jonathan Aquilina
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Beowulf mailing list, Beowulf at beowulf.org
> To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf

_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.



More information about the Beowulf mailing list