[Beowulf] centos5 as cluster os
landman at scalableinformatics.com
Tue Feb 26 12:15:37 EST 2008
Toon Moene wrote:
> Three months ago I bought a machine (from a vendor I won't name, because
> it was HP), that featured a 320 Gbyte IDE drive and a (removable, but
> kept installed in my case) 320 Gbyte SCSI device).
> The Stable install went fine - IDE drive got /dev/hda1 (swap) and
> /dev/hda2 (/ - the rest of the device). SCSI drive got /dev/sda1
> (/scratch - I need lots of it).
> So far, so good. I downloaded the e1000 ethernet driver, because it
> wasn't included in stable's 2.6.18-5 kernel. Compiled, modprobed,
> dhclient'ed to my ISP's modem, all OK.
> Changed /etc/apt/sources.list to exclude the DVD and include
> deb http://ftp.nl.debian.org/debian testing main contrib
> and apt-get update && apt-get dist-upgrade'd away.
> Unfortunately, the resulting system (unlike the original from the DVD)
> won't boot - it can't find the boot device. It does (helpfully) display
> the message that the root device might be renamed (/dev/sda2), but
> booting with that root device doesn't bring up the system.
Did any of these steps do a
that you remember? If so, is it possible that your scsi stuff got
excluded from the initrd?
> Something rather fundamental must have changed (probably in udev)
> between "stable" and the recent "testing" system - but what ?
Might not be udev, could be a missing scsi driver in initrd.
Joseph Landman, Ph.D
Founder and CEO
Scalable Informatics LLC,
email: landman at scalableinformatics.com
web : http://www.scalableinformatics.com
phone: +1 734 786 8423
fax : +1 866 888 3112
cell : +1 734 612 4615
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf