[Beowulf] Personal Introduction & First Beowulf Cluster Question

Joe Landman landman at scalableinformatics.com
Mon Dec 8 13:34:44 EST 2008


Steve Herborn wrote:
> 
> 
> Good day to the group.  I would like to make a brief introduction to 
> myself and raise my first question to the forum.
> 
>  
> 
> My name is Steve Herborn and I am a new employee at the United States 
> Naval Academy in the Advanced Research Computing group which supports 

Greetings Steve

> the IT systems used for faculty research.  Part of my responsibilities 
> will be the care & feeding of our Beowulf Cluster which is a 
> commercially procured Cluster from Aspen Systems.  It purchased & 
> installed about four or five years ago.  As delivered the system was 
> originally configured with two Head nodes each with 32 compute nodes.  
> One head node was running SUSE 9.x and the other Head Node was running 
> // Scyld (version unknown) also with 32 compute nodes.  While I don’t 
> know all of the history, apparently this system was not very actively 
> maintain and had numerous hardware & software issues, to include losing 
> the array on which Scyld was installed.   //Prior to my arrival a 

Ouch ... if you call the good folks at Aspen, they could help with that 
(ping me if you need a contact)

> decision was made to reconfigure the system from having two different 
> head nodes running two different OS Distributions to one Head Node 
> controlling all 64 Compute Nodes.  In addition SUSE Linux Enterprise 
> Server (10SP2) (X86-64) was selected as the OS for all of the nodes. 

Ok.

> Now on to my question which will more then likely be the first of many.  
> In the collective group wisdom what would be the most efficient & 

Danger Will Robinson ... for the N people who answer, you are likely to 
get N+2 answers, and N/2 arguments going ... not a bad thing, but to 
steal from the Perl motto "there is more than one way to do these things 
..."

> effective way to “push” the SLES OS out to all of the compute nodes once 
> it is fully installed & configured on the Head Node.  In my research 

First:  Stateless (e.g. diskless) versus Stateful (e.g. local 
installation).  Scyld is "stateless" though Don will likely correct me 
(as this is massively oversimpilfied).  SuSE can be installed Stateless 
or Stateful.  Its installation can be automated ... we have been doing 
this for years (one of the few vendors to have done this with SuSE).  It 
can also be run diskless ... we have booted compute nodes with 
Infiniband to fully operational compute nodes visible in all aspects 
within the cluster in under 60 seconds.  This is the case for 9.3, 10.x 
SuSE flavors.

> I’ve read about various Cluster packages/distributions that have that 
> capability built in, such as ROCKS & OSCAR which appear to have the 
> innate capability to do this as well as some additional tools that would 
> be very nice to use in managing the system.  However, from my current 
> research in appears that they do not support SLES 10sp2 for the AMD 

Rocks only supports Redhat and rebuilds, I wouldn't recommend it for the 
task as you have indicated.

Oscar might be able to handle this, though I haven't kept up on it, so I 
am not sure how active it is.

You want to look at xCat v2 (open source), and Warewulf/Perceus (open 
source).  Our package (Tiburon) is not ready to be released, and we will 
likely make it a meta package atop Perceus at some point soon.  Though 
it is used in production at several large commercial companies 
specifically for SuSE clusters.

> 64-bit Architecture (although since I am so new at this I could be 
> wrong).  Are there any other “free” (money is always an issue) products 
> or methodologies I should be looking at to push the OS out & help me 
> manage the system?  It appears that a commercial product Moab Cluster 

See above.  If you want a prepackaged system, likely you are going to 
need to spend money.  Moab is a possibility, though for SuSE, I would 
recommend looking at Concurrent Thinking's appliance.  It will cost 
money, but they solve pretty much all of the problems for you.

> Builder will do everything I need & more, but I do not have the funds to 
> purchase a solution.   I also certainly do not want to perform a manual 
> OS install on all 64 Compute Nodes.

No... in all likelihood, you really don't want to do any installation to 
the nodes (stateless if possible).

> 
>  
> 
> Thanks in advance for any & all help, advice, guidance, or pearls of 
> wisdom that you can provide this Neophyte.   Oh and please don’t ask why 
> SLES 10sp2, I’ve already been through that one with management.  It is 
> what I have been provided & will make work.

It's not an issue, though we recommend better kernels/kernel updates. 
Compared to the RHEL kernels, it uses modern stuff.

Joe

> 
>  
> 
>  
> 
> ** Steven A. Herborn **
> 
> * * U.S. * * ** Naval Academy **
> 
> ** Advanced Research Computing **
> 
> ** 410-293-6480 (Desk) **
> 
> ** 757-418-0505 (Cell) **** **
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Beowulf mailing list, Beowulf at beowulf.org
> To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf


-- 
Joseph Landman, Ph.D
Founder and CEO
Scalable Informatics LLC,
email: landman at scalableinformatics.com
web  : http://www.scalableinformatics.com
        http://jackrabbit.scalableinformatics.com
phone: +1 734 786 8423 x121
fax  : +1 866 888 3112
cell : +1 734 612 4615
_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.



More information about the Beowulf mailing list