[Beowulf] Weird CentOS Install Problem
jac67 at georgetown.edu
Mon Aug 11 15:44:52 EDT 2008
I just re-read your message more carefully and you may have a different
problem if you didn't try to set up the non-80 GB volume in Anaconda.
Are you using a /boot partition on the 80 GB volume? If not, I would try
that first like the others have said.
Jess Cannata wrote:
> I have had the same problem. You should double-check that the non-80
> GB volume has a GPT type partition table set. To see your current
> partition table setting, run parted /dev/<your_volume> and then
> "print." You should see something like this:
> parted) p
> Disk geometry for /dev/sde: 0.000-2626094.625 megabytes
> Disk label type: gpt
> Minor Start End Filesystem Name Flags
> 1 0.017 2626093.625 ext3
> I've noticed that Red Hat's Anaconda will create an MS-DOS partition
> table on the disk even though MS-DOS partition tables cannot support
> greater than 2 TB volumes. You can use "parted" to change it to GPT
> via the mklabel option. Then you can create the ext3 file system.
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf