[Beowulf] Cluster Diagram of 500 PC

Mark Hahn hahn at mcmaster.ca
Wed Jul 11 12:18:10 EDT 2007


there are now several switches on the market that have,
for instance, 48x Gb ports and 2-4 10G ports.  having 
the higher-speed ports is attractive both to attach servers,
but also to build a larger switch fabric.  in particular, 
if you have 5x of these switches, you could plug their 10G
ports into each other and entirely avoid a top-level switch.
it "only" gets you to 240 nodes, but is also fairly cheap.

my question is: do switches these days have smart protocols for 
mapping and routing in such a configuration?  I know that the original 
spanning tree protocol would reduce such a config to a single tree,
turning off all the redundant links, effectively creating a hotspot
and ~doubling hop-counts.  maybe with vlans this could be avoided?

(incidentally, I notice HP is bragging about latencies <2.1 us
for 10G and <3.7 for 1G, as well as supporting jumbo packets 
even on fairly economy-level switches...)
_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf

!DSPAM:4695037b83523122173853!



More information about the Beowulf mailing list