[Beowulf] Building a 2 node cluster using mpich
james.p.lux at jpl.nasa.gov
Thu Dec 27 14:31:17 EST 2007
Quoting Kalpana Kanthasamy <kalpana0611 at gmail.com>, on Thu 27 Dec 2007
09:33:49 AM PST:
> 3.Cluster is private. I have used IP address 192.168.0.190 for the
> master node and 192.168.0.191 for the slave node.
I prefer to avoid any .zero addresses... 192.168.1.190 would be my choice..
Just because a lot of consumer equipment uses the 192.168.1.x range by
default (e.g. that firewall, wireless access point, etc.)
Although, looking over some notes, I see I use 10.0.0.x a lot, too.
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf