[Beowulf] Help with inconsistent network performance

Brendan Moloney moloney.brendan at gmail.com
Tue Dec 18 23:14:49 EST 2007


Ok guys, thanks for all the feedback.

I guess I should have provided some more specific details.  I am using
sockets with TCP/IP for the final gather stage.  I am doing real-time
(volume) rendering.  The images are 32-bit (RGBA with 8 bits per channel).
 The machines are running the 2.6 kernel and I have confirmed that the max
TCP send/recv buffer sizes are 4MB (more than enough to store the full
512x512 image).

I wrote two simple test programs to make sure that it was not something else
in my rather complex rendering pipeline (memory allocation etc.).  The
server side test program launches N nodes using mpich2, each of which
establishes a connection to the view client with a socket over TCP/IP. Then
I loop with the client side program sending a single integer to rank 0, then
rank 0 broadcasts this integer to the other nodes, and then all nodes send
back 1MB / N of data.

To make sure there was not an issue with the MPI broadcast, I did one test
run with 5 nodes only sending back 4 bytes of data each.  The result was a
RTT of less than 0.3 ms. Next I did a run with one node sending 1 MB back to
the client, the result was an RTT of less than 12ms.  Letting the test run
in a loop I saw that the first ~100 packets were a bit slower (~16 ms) and
then not a single packet took longer than 14 ms.  So the performance was
very consistent, as expected for a single node. Then I did a run with two
nodes sending back 1/2 MB each, the result was an RTT of ~16 ms on frames
without a hiccup.  About 0.2% of the frames were hiccups. On a run with 3
nodes sending back 1/3 MB each I got an RTT of ~19-20 ms and again about
0.2% of the frames were hiccups.
With 4 nodes sending 1/4 MB each I got an RTT of ~20-21 ms and about
3.5% of the frames were hiccups.
Finally with 5 nodes sending 1/5 MB each I got an RTT of ~21ms and about
13.5% of the frames were hiccups.  I could not test on more nodes as the
other computers were in use by other people.

One interesting pattern I noticed is that the hiccup frame RTTs, almost
without exception, fall into one of three ranges (approximately 50-60,
200-210, and 250-260). Could this be related to exponential back-off?

Tommorow I will experiment with jumbo frames and flow control settings (both
of which the HP Procurve claims to support).  If these do not solve the
problems I will start sifting through tcpdump.

Thanks,
Brendan


!DSPAM:47689b2e158461735719037!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.clustermonkey.net/pipermail/beowulf/attachments/20071218/aae520b7/attachment-0001.html>
-------------- next part --------------
_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf


!DSPAM:47689b2e158461735719037!


More information about the Beowulf mailing list