[Beowulf] Request for comments: diskless cluster

stephen mulcahy smulcahy at aplpi.com
Tue Dec 18 11:41:18 EST 2007


Jorge Salamero Sanz wrote:
> Hi all,
> 
> I'm going to move a 42-nodes beowulf to diskless mode (currently all local 
> cloned installations).
> 
> Which system / tools do you recommend to manage the client-images ?
> 
> I was thinking on a debootstraped dir shared as NFS root. The differences 
> between the nodes (/etc/hostname, /etc/fstab, /etc/exportfs ...) could be 
> managed with unionfs.
> 
> Debian has a couple of tools that could help (live-helper for making custom 
> images) but maybe lessdisk would be more suitable. Which one do you use ?
> 
> How do you manage this kind of cluster setup ?

Hi Jorge,

We built a system like this for a customer a few years ago and it has 
performed very well. We have a head-node which acts as a management node 
and an NFS server for the diskless workstations in the cluster.

We used debbootstrap to build images for the diskless nodes. We opted to 
keep separate disk images for each diskless node in order to keep things 
simple - I'm sure you could do the same with unionfs or similar but 
diskspace is cheap and the effort to put together something with unionfs 
didn't seem to be justified at the time.

To add a new node, we simply copy the debootstrapped directory contents 
and change the hostname.

Each diskless node uses PXE to boot and a monolithic kernel compiled 
with just the basics needed for the compute nodes. We did some 
experiments with initrd images and modular kernels but there were some 
issues with Debian which caused us problems (see bugs 
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=386959 and 
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=388761) this may have 
been fixed since we last looked at it but again, the effort to fix it, 
given that we had a working system wasn't justified.

You may need to use a separate network for PXE booting your nodes - we 
experienced problems using a gigabit ethernet network for PXE booting 
where nodes randomly failed to get a response from the DHCP server. I 
suspect there was a bug in the PXE firmware which occasionally caused it 
to fail while the network cards were negotiating gigabit speed (but I 
have no evidence to back this up) - moving PXE booting to a separate 
fast ethernet network resolved the problem.

I'm not familiar with live-helper or lessdisk, perhaps I need to do more 
reading :)

Hope this info is of some use, I've probably only covered some random 
aspects of our config that spring to mind ...

-stephen


-- 
Stephen Mulcahy, Applepie Solutions Ltd., Innovation in Business Center,
GMIT, Dublin Rd, Galway, Ireland.  +353.91.751262  http://www.aplpi.com
Registered in Ireland, no. 289353 (5 Woodlands Avenue, Renmore, Galway)
_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf

!DSPAM:4767fad1179211745845678!



More information about the Beowulf mailing list