[Beowulf] diskless booting over jumbo frames

Amrik Singh asingh at ideeinc.com
Mon Apr 23 19:17:09 EDT 2007


Hi Guys,

We are trying to setup a cluster with jumbo frames in the hope that it 
would speed up the NFS. The problem is the booting of the diskless nodes.
As the nodes boot, the kernel level IP configuration uses the default 
MTU size (1500). This results in their inability to mount the root 
partition from the NFS server as the server is configured to use the 
jumbo frames.

We have already added  "option interface-mtu 9000;" to the dhcpd.conf on 
the server, but the nodes ignore this option.

We are using SuSE-linux 10.0 and kernel version is 2.6.13-15-smp.

The MTU size on the server is set to 9000 and jumbo frames is enabled on 
the switch and everything works fine if we boot from the hard drive.


thanks

-- 
Amrik 


_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf

!DSPAM:462e4fae324892020149523!



More information about the Beowulf mailing list