[Beowulf] Arima sensors.conf files
john.hearns at streamline-computing.com
Fri Oct 27 03:40:01 EDT 2006
Geoff Jacobs wrote:
> Does anyone on this list have experience configuring lm-sensors on HDAMA
> boards? The lm-sensors database doesn't have the HDAMA board in their
> database and it would be nice to not have to calibrate manually.
I have had experience with HDAMA boards, installed what I believe is the
first Opteron cluster in the UK, which used HDAMA boards.
I worked on getting lm_sensors working on them, but found as you describe.
I suggest getting the BMC management cards, then you could do IPMI based
monitoring. I seem to recall though that you would have to order these
at build time,
as the sockets for BMC card are not necessarily soldered onto the
motherrboard, ie there may just be a patch with solder tags on it.
I could be very wrong here.
Senior HPC Engineer
The Innovation Centre, Warwick Technology Park,
Gallows Hill, Warwick CV34 6UW
Office: 01926 623130 Mobile: 07841 231235
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf