[Beowulf] Building my own highend cluster

pauln pauln at psc.edu
Wed Jun 28 17:04:39 EDT 2006


This isn't very good but it gives an overview of what I'm doing -
it's not exact and needs updating.  If people are interested in more
detail I'll gladly update the page.  It also doesn't explain howto use 
cfengine
to configure the ramdisk.

.. my apologies in advance:
http://www.psc.edu/~pauln/Diskless_Boot_Howto.html

Basically we build a node with kickstart (or whatever) and then tar up
it's entire filesystem back to the server.  Then make a 64MB ramdisk and
stick the contents of "/" into that.  There are some etc files which 
need to be
modified too - rc.sysinit, fstab being the critical ones.  Then we use 
pxelinux
and pxe booting to load the kernel and ramdisk  onto the client. 

The reason for using cfengine is so the same ramdisk can be used for 
machines of
different classes or types.  Editing the ramdisk is a pain, but making 
changes
to the cfagent text file is really easy.  As you stated, mounting root 
over nfs is
inefficient and requires server directories for each client though we still
use NFS for /usr.

One of our production storage clusters uses this technique for booting.  
Since
we require that /usr/ is mounted via NFS and this represents a single point
of failure, we cluster 2 nfs servers with the heartbeat package (which 
share
/var/lib/nfs).

paul

Vincent Diepeveen wrote:

> Hi Paul,
>
> Have a FAQ which describes how to boot nodes diskless?
>
> I'm about to build coming months a 16 node cluster (as soon as i've 
> got budget
> for more nodes) and the only achievement in my life so far in beowulf
> area was getting a 2 node cluster to work *with* disks.
>
> That's too expensive however and eating unnecessary power.
> 14 disks is $$$ but more importantly also eat effectively nearly 30 
> watt a disk from the power
> (maxtors are like 22 watt and that's *after* the psu lost a lot of 
> power!!!!).
>
> Let's save on power therefore!
>
> Further my experiences with NFS is that it slows down the entire network.
>
> My basic idea is to just buy some wood, and mount 7-14 mainboards
> with each a dual woodcrest 1.6ghz dual core and 512MB ram (or less
> if i can get that RAM a lot cheaper), or when budget is smaller then
> simply A64 with a single chip or mainboards with a single woodcrest 
> chip (in both
> cases dual core of course).
>
> At it, the 'master node' being a dual opteron dual core (or a 15th 
> node having
> a bit faster woodcrest chips and quite a bit more RAM) which i plan
> to connect to 2 switches which can have 8 nodes each, or if i can 
> afford it and
> it exists a 16 node switch.
>
> Put the wood & mainboards in in the garage then take a big fan which 
> can use a
> pipe to blow out air and make some filter to allow air getting into 
> the garage,
> this filter catching dust.
>
> The big advantage of putting the cluster in the garage is because a 
> big white Canadian/American
> shepherd will guard it nearly 20 hours a day there.
>
> (Anyway any environmental norm with respect to radiation i don't need 
> to care about when constructing that supercomputer,
> just walking the dog means in this country you break the law; and in 
> the meantime my government has
> 12 meters away from that garage 2 x 450 megawatt (MVA) powerlines,
> as they don't need to fix any existing bad situations. In fact they're 
> busy building a new swimming pool for hundreds of kids underneath
> those 2 x 450 megawatt cables right now).
>
> So the only questions right now are:
>
> a) which cables do i need for QM400 cards to connect?
> b) which SWITCHES work for QM400 cards?
> c) do QM400 cards work node <==> node without switch in between (just 
> like the QM500s worked here like that)
> d) will they work for those woodcrest mainboards?
>
> Of course looking for second hand cables, second hand switches?
> diep at xs4all.nl to email to for those who have some left.
>
> I've got 17 of those cards so could on paper move to 16 nodes (keeping 
> 1 card in reserve).
>
> SOFTWARE for the cluster:
>
> My plan is to take a look once more again to openmosix and openssi and 
> plan to modify it, even if i lose a factor
> 2 in latency to it after modification, if that would give the 
> possibility for a shared memory supercomputer then that's
> quite awesome and preferred. If losses under factor 2 are not possible 
> to latency then i'll again have to work with the
> shmem library.
>
> Programming in MPI/SHMEM is by the way pretty retarded way to program.
>
> Shared memory programming is just *so superior* over that in terms of 
> ease for the programmer and it also means
> you can just recompile your code to work on a quad opteron or 8 
> processor opteron without any need to strip
> MPI commands.
>
> Patching openssi or openmosix is probably more interesting to do than 
> continueing an old MPI/SHMEM version.
>
> Migration of shared memory by the way is not needed and not preferred 
> for the approach i use in Diep,
> so on paper both OpenMosix and OpenSSI qualify.
>
> If it can work then that'll be a factor 2.8 ^ 7 = 1349 times more 
> powerful than deep blue at least, and factor 2 more
> powerful than hydra and it's very secure and fool proof, just not 
> saucage proof.
>
> Hydra managed to get on CNN regurarly when playing Adams. Amazingly. 
> We'll hit by september probably indirectly
> national TV when selling one of our products and i hope to reach some 
> more when this cluster works.
>
> Thanks for any suggestions,
> Vincent
>
> ----- Original Message ----- From: "pauln" <pauln at psc.edu>
> To: "Vincent Diepeveen" <diep at xs4all.nl>
> Cc: "Eray Ozkural" <examachine at gmail.com>; <beowulf at beowulf.org>
> Sent: Wednesday, June 28, 2006 8:39 PM
> Subject: Re: [Beowulf] Ultimate cluster distro
>
>
>> This isn't really a distribution-related comment but in light of 
>> Vincent's
>> points I think it's appropriate.  We're running diskless nodes from a 
>> single
>> generic root fs ramdisk which is dynamically configured at boot by a
>> cfengine script.  Other filesystems (ie /usr) are mounted over nfs.  
>> I've found
>> that this combination of pxelinux and cfengine is extremely powerful for
>> managing clusters - especially ones that tend to change frequently. paul
>
>
>> Vincent Diepeveen wrote:
>>
>>> Let me kick off with a few points, most likely many will enhance 
>>> that with more points
>>>
>>> a) having a compiled driver into the kernel of the network card in 
>>> question
>>>    this is by far the hardest part.
>>> b) pdsh installed at all machines and naming of machines in a 
>>> logical manner
>>> c) diskless operation at nodes other than the masternode, using 
>>> local disk only as 'scratch'
>>> d) because A usually goes wrong the capability to easily compile a 
>>> vanilla kernel inside the distribution
>>>
>>> D is by far most important
>>>
>>> Vincent
>>> ----- Original Message ----- From: "Eray Ozkural" 
>>> <examachine at gmail.com>
>>> To: <beowulf at beowulf.org>
>>> Sent: Saturday, June 24, 2006 3:06 PM
>>> Subject: [Beowulf] Ultimate cluster distro
>>>
>>>
>>>> I would like to make a small survey here to get
>>>> a rough idea of every essential detail in a cluster
>>>> distro, because I am thinking of writing some add-on
>>>> for our linux distribution to this end.
>>>>
>>>> Best,
>>>>
>>>> -- 
>>>> Eray Ozkural (exa), PhD candidate.  Comp. Sci. Dept., Bilkent 
>>>> University, Ankara
>>>> http://www.cs.bilkent.edu.tr/~erayo  Malfunct: http://www.malfunct.com
>>>> ai-philosophy: http://groups.yahoo.com/group/ai-philosophy
>>>> Pardus: www.uludag.org.tr   KDE Project: http://www.kde.org
>>>> _______________________________________________
>>>> Beowulf mailing list, Beowulf at beowulf.org
>>>> To change your subscription (digest mode or unsubscribe) visit 
>>>> http://www.beowulf.org/mailman/listinfo/beowulf
>>>>
>>>
>>> _______________________________________________
>>> Beowulf mailing list, Beowulf at beowulf.org
>>> To change your subscription (digest mode or unsubscribe) visit 
>>> http://www.beowulf.org/mailman/listinfo/beowulf
>>
>>
>>
>>
>
> _______________________________________________
> Beowulf mailing list, Beowulf at beowulf.org
> To change your subscription (digest mode or unsubscribe) visit 
> http://www.beowulf.org/mailman/listinfo/beowulf


_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list