[Beowulf] Opteron nodes w/PCI-E (for 4x IB)
kus at free.net
Wed Jul 5 14:20:04 EDT 2006
I'm looking for possible choice of chipset (and therefore
motherboards) for dual Opteron-based 4U-nodes (i.e. higher than 1U :-)
!) having PCI-E (PCI-Express) support.
I need PCI-E x8 for Mellanox MHGS18 or MHGA28 HCAs
having DDR mode (20 Gb/s). So the only choice, IMHO, is:
1) ServerWorks BCM5780/5785
- for example, Tyan Thunder K8HR (S3891) having
PCI-E x16 w/2 * x8 signals
2) AMD8000 + nVidia nForce4 Professional 2200
- for example, Tyan Thunder K8SE (S2892, or may be
K8SRE=S2891) having PCI-E x16.
As I understand, any x16 slot is appropriate for x8 cards
(is it right ?)
I prefer Tyan mobos simple because I have good experience w/Tyan
(Supermicro products were usually more expensive).
But what is known about pluses or minuses of this chipsets
(or motherboards) - especially in the sense of reliability etc ?
ServerWorks looks for me as more solid; nVidia chips required
(in the past) some needs to install own Linux drivers etc.
But ServerWorks-based Tyan S3891 is absent currently in Russia,
and S3892 costs about $750 (something about USD 200 higher
than S2892), so nVidia Prof 2200 is preferred for me today.
BTW, more cheap dual Opteron motherboard w/PCI-E support is
Supermicro H8DCE-B (again nVidia; formally
for workstations; but I may try to find 2nd hand PCI-32 graphics
card for it :-))
Thanks for your help in the future !
Zelinsky Institute of Organic Chemistry
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf