[Beowulf] Supermicro H8SSL-R10 versus H8SSL-i motherboards,, Broadcom SATA chips
ballen at gravity.phys.uwm.edu
Wed Jan 25 20:29:33 EST 2006
On Wed, 11 Jan 2006, Maurice Hilarius wrote:
>> Has anyone on the list seen or used a Supermicro H8SSL-R10 motherboard?
> We too are waiting for SMicro to release the Serverworks boards with
> **functioning** RAID on them. For example we are using their 1020P-T
> server, but for now have to use a 3rd party card, such as the 3Ware 9550
> to get this working.
> As I understand it the problem is something in the SWorks/Broadcom chip.
OK. Thanks for confirming this problem.
> As far as "RAID" goes, from what I understand the SWorks is still a
> "FRAID" device, so I think your idea about using mdadm or similar
> software RAID makes good sense for a RAID1 scenario. About the only
> drawback that counts (to some) would be the lack of disk hot-swap
Do you know if the dmraid tools
http://people.redhat.com/~heinzm/sw/dmraid/ can be used with the H8SSL-i
or if this only work with the R10 style RAID?
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf