[Beowulf] Beowulf, Gentoo and Navier Stokes solvers
James.P.Lux at jpl.nasa.gov
Mon Feb 6 17:53:13 EST 2006
At 09:00 AM 2/6/2006, Alan Jones wrote:
>I'll start by introducing myself being my first post on the list. As the
>header suggests my name is Alan - I'm head of R&D at a production (visual
>effects) house in London.
>I'm currently looking into developing a cluster to perform fluid
>simulation and google, while providing plenty of information, hasn't shown
>what I'm after.
Hmm.. a lot of the CFD codes I've seen tend to be very application
specific. With all finite element codes, specifying the model and the
simulation environment (grid style, step sizes, time steps, etc.) is most
of the battle, since the actual grunt work of running the model is actually
pretty straight forward from a coding standpoint (although it consumes the
vast majority of the processor cycles).
But, then, this is no different than CGI.. it's specifying the model that's
the hard part, not firing off the rendering.
So, you might want to poke at all those CFD codes out there and see which
ones are suited to what YOU are trying to model. Supersonic flow in a gas
turbine isn't likely to be handled by the same code as modeling the flow of
cooling air in a cluster server room or, for that matter, tornado simulator
dynamics (which was MY foray into CFD).
While this list isn't necessarily a great place to ask about the details of
CFD codes (maybe it is, though), I'll bet that the folks on the list, if
they don't know, they do know someone who does, and will get you started in
the right direction.
James Lux, P.E.
Spacecraft Radio Frequency Subsystems Group
Flight Communications Systems Section
Jet Propulsion Laboratory, Mail Stop 161-213
4800 Oak Grove Drive
Pasadena CA 91109
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf