[Beowulf] Remote console management
ballen at gravity.phys.uwm.edu
Thu Sep 22 17:35:09 EDT 2005
We're getting ready to put together our next large Linux compute cluster.
This time around, we'd like to be able to interact with the machines
remotely. By this I mean that if a machine is locked up, we'd like to be
able to see what's on the console, power cycle it, mess with BIOS
settings, and so on, WITHOUT having to drive to work, go into the cluster
One possible solution is to buy nodes that have IPMI cards. These
piggyback on the ethernet LAN and let you interact with the machine even
in the absence of an OS. With the appropriate tools running on a remote
machine, you can interact with the nodes even if they have no OS on them
or are hung.
Another solution is to use the DB9 serial ports of the nodes. You have an
'administrative' box containing lots of high-port-count serial cards (eg,
Cyclades 32 or 64 port cards) and then run a serial cable from each node
to this box. By remotely logging into this admin box you can access the
serial ports of the machines, and if the BIOS has the right
settings/support, this lets you have keyboard/console access.
Or one can do both IPMI + remote serial port access.
Could people on this list please report their experiences with these or
other approaches? In particular, does someone have a simple and
inexpensive solution (say < $100/node) which lets them remotely:
- power cycle a machine
- examine/set BIOS values
- look at console output even for a dead/locked/unresponsive box
U. of Wisconsin - Milwaukee Physics Department
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf