[Beowulf] problems to install clustermatic4

Ted Sariyski tsariysk at craft-tech.com
Wed Sep 1 15:32:01 EDT 2004


Hi,
I try to install clustermatic4 on a opteron cluster running SuSe Server9
for AMD64 (Tian B2882 Transport GX28). While installing rpms I get
errors for bproc-modules and v9fs-mounter-smp:

#> depmod: QM_MODULES: Function not implemented

mkinitrd fails to determine dependencies  for sata_sil, reiserfs and
raid1 (below is the full output from mkinitrd).  I'll try to use ata
instead of sata and ext2 or ext3 instead of reiserfs. I would like to
have the head node booting from a raid but it seems that it causes
problems too. Could somebody share experience, please? I'll highly
appreciate any hints, advice, links, etc.
Thanks,
Ted


#> mkinitrd
Root device:    /dev/md0 (mounted on / as reiserfs)
Module list:    sata_sil reiserfs raid1

Kernel image:   /boot/vmlinuz-2.4.22-cm36
Initrd image:   /boot/initrd-2.4.22-cm36
Shared libs:    lib64/ld-2.3.3.so lib64/libc.so.6
No modules.pcimap file found
Cannot determine dependencies of module sata_sil. Is modules.dep up to date?
Cannot determine dependencies of module reiserfs. Is modules.dep up to date?
Cannot determine dependencies of module raid1. Is modules.dep up to date?
Modules:
none
Including:      raidautorun
Bootsplash:     SuSE-SLES (1280x1024)

Kernel image:   /boot/vmlinuz-2.4.22-cm36smp
Initrd image:   /boot/initrd-2.4.22-cm36smp
Shared libs:    lib64/ld-2.3.3.so lib64/libc.so.6
No modules.pcimap file found
Cannot determine dependencies of module sata_sil. Is modules.dep up to date?
Cannot determine dependencies of module reiserfs. Is modules.dep up to date?
Cannot determine dependencies of module raid1. Is modules.dep up to date?
Modules:
none
Including:      raidautorun
Bootsplash:     SuSE-SLES (1280x1024)

Kernel image:   /boot/vmlinuz-2.6.5-7.97-smp
Initrd image:   /boot/initrd-2.6.5-7.97-smp
Shared libs:    lib64/ld-2.3.3.so lib64/libc.so.6 lib64/libselinux.so.1
Modules:        kernel/drivers/scsi/scsi_mod.ko
kernel/drivers/scsi/sd_mod.ko kernel/drivers/scsi/libata.ko
kernel/drivers/scsi/sata_sil.ko kernel/fs/reiserfs/reiserfs.ko
kernel/drivers/md/raid1.ko
Including:      raidautorun
Bootsplash:     SuSE-SLES (1280x1024)

Run lilo now to update the boot loader configuration.


_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list