[Beowulf] dual Opteron recommendations

Thomas Alrutz Thomas.Alrutz at dlr.de
Fri Oct 22 08:05:47 EDT 2004


Alan Scheinine schrieb:
> Many venders sell U1 cases for dual Opteron based on the Tyan
> main boards, but on the other hand, a vender here says that the
> product Newisys 2100 is much more reliable than Tyan though it
> costs 10 to 20 percent more.  I have not previously heard of
> Newisys and I do not recall it being mentioned in this mailing
> list.  Would anyone like to comment?
> best regards,
> Alan Scheinine   Email: scheinin at crs4.it
> _______________________________________________
> Beowulf mailing list, Beowulf at beowulf.org
> To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf

Hi Alan,

we have some Opteron cluster nodes and some Opteron workstations based 
on the Arima HDAMA MB (Rioworks http://www.rioworks.com/HDAMA.htm).
We are quite happy with those systems, because there are running without 
any failure since installation (one year ago).
And as far as I know, there are some 1U barebones with this type of 
board, too. If you looking for a remote managment system on your 
motherboards, there is the possibility to attach an IPMI-Board called 
ARMC to the HDAMA. This would give you the same mamagement features like 
the Newisys boards, but for additional costs (~300 US$ ??) and size.

Thomas
-- 
  __/|__ | Dipl.-Math. Thomas Alrutz
/_/_/_/ | DLR Institute of Aerodynamics and Flow Technology
   |/    | Numerical Methods Department
     DLR | Bunsenstr. 10
         | D-37073 Goettingen/Germany


_______________________________________________
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf



More information about the Beowulf mailing list