[Beowulf] bandwidth: who needs it?
james.p.lux at jpl.nasa.gov
Thu Oct 21 14:53:17 EDT 2004
Bandwidth is also important if you have any sort of "store and forward"
process in the comm link (say, in a switch), because, typically, you have to
wait for the entire message to arrive (so you can check the CRCC) before you
can send it on it's way to the next destination. I'm sure that there are
high performance switches around that only wait 'til enough of the header
arrives to make the routing decision, but then, the switch has to passively
pass the data through without error checking.
----- Original Message -----
From: "Greg Lindahl" <lindahl at pathscale.com>
To: "Mark Hahn" <hahn at physics.mcmaster.ca>
Cc: <Beowulf at beowulf.org>
Sent: Thursday, October 21, 2004 10:58 AM
Subject: Re: [Beowulf] bandwidth: who needs it?
> > do you have applications that are pushing the limits of MPI bandwidth?
> > for instance, code that actually comes close to using the 8-900 MB/s
> > that current high-end interconnect provides?
> Bandwidth is important not only for huge messages that hit 900 MB/s,
> but also for medium sized messages. A naive formula for how long it
> takes to send a message is:
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf