[Beowulf] SATA vs SCSI drives
hahn at physics.mcmaster.ca
Tue Oct 12 11:46:07 EDT 2004
> Though slightly dated, I hope the attachment is helpful....btw....I didn't
> do an exhaustive search, but found the 10K SATA drives only offered at
> 72GB's and under. The higher cap drives are 7200RPM.
that's correct. but remember - RPM is mainly for latency, not bandwidth.
if your workload is not incredibly seeky, then you don't want to pay
for latency, since higher density leads to lower cost, bigger disks, higher
bandwidth and slower seeks.
- meet your reliability requirements using raid. it's insane
to think about relying on a single disk in any non-ephemeral
setting anyway. raid lets you achieve pretty much any reliability
you want (as well as offering a broad spectrum of performance.)
- meet your seek-rate requirements using RPM. I find very, very
few applications are really seek-limited - really it's only very
databases with uniform-random distribution of reads of tiny data
from monumentally large tables. in particular, if there's any
data locality or reuse at all, spend money on RAM not RPM.
- for anything large, get MTBF specs for prospective disks.
this lets you calculate how often you'll be replacing hardware,
physically. your raid has taken care of data robustness;
this is purely a maintenance issue.
there's no dramatic difference in any of the families of disks available
(well, avoid 1yr warranties, of course!). consider, for instance, that
you can easily build raids based on 300G SATA disks that have half as
many moving parts as with 147G SCSI disks. even if the MTBF's differ
by 50% (guess 1.0 and 1.5 Mhours respectively) SATA is more reliabile.
it'll probably also be 1/4 the price and sometimes actually faster.
regards, mark hahn.
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf