kill a watt?
James.P.Lux at jpl.nasa.gov
Sun Mar 9 19:35:25 EST 2003
Radio Shack had these things on sale a few months back (possibly an
inventory clearance.).. Under the same brand name (Kill-A-Watt)
Claims 0.2% of reading accuracy, which is quite impressive. (typical...
worst case is 1%.. still impressive)
(specs are over this range: 90-125V, 0.2-15A)
active/apparent power 0-1875W or VA (0.5%typ/2%WC)
PF 0.00-1.00 (0.01 typ, 0.03WC)
I've seen web reports that it handles phase controlled SCR dimmer loads
correctly, so it will probably handle the weird current waveform
characteristic of a PC power supply.
Sure, it'd be nice if it had an external interface, but then it would cost
$500+, if only because it's a line connected device, and you'd have to
provide isolation, etc. There's a web site out there where someone took it
apart... everything is floated at line voltage inside (which makes it muy
cheap) much like X-10 stuff.
----- Original Message -----
From: "Mark Hahn" <hahn at physics.mcmaster.ca>
To: <beowulf at beowulf.org>
Sent: Sunday, March 09, 2003 2:06 PM
Subject: kill a watt?
> the name is aweful, I know, but has anyone tried:
> it liiks like a nice (cheap) way to take the guesswork out of
> how much power a cluster node is drawing. admittedly, it would
> be nicer if it had a serial/net/usb port, but...
> given that it apparently measures V, f and PF, does that mean it'll
> be hip to the true-rms thing?
> thanks, mark hahn.
> Beowulf mailing list, Beowulf at beowulf.org
> To change your subscription (digest mode or unsubscribe) visit
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf