question about Intel P4 versus Alpha's
Henderson, TL Todd
Todd_Henderson at isl-3com.com
Thu Jan 9 08:51:17 EST 2003
These are the regular run of the mill P4's.
From: Brian [mailto:netengineer at cox.net]
Sent: Thursday, January 09, 2003 7:46 AM
To: Henderson, TL Todd; 'Patrick Geoffray'
Cc: beowulf at beowulf.org
Subject: Re: question about Intel P4 versus Alpha's
Hyperthreading has been available on all P4 Xeon's since the start. The
standard P4's above 3.xx ghz now support it as well.
----- Original Message -----
From: "Henderson, TL Todd" <Todd_Henderson at isl-3com.com>
To: "'Patrick Geoffray'" <patrick at myri.com>
Cc: <beowulf at beowulf.org>
Sent: Wednesday, January 08, 2003 12:49 PM
Subject: RE: question about Intel P4 versus Alpha's
> These are P4 2.4 ghz and I didn't find anything in the bios about it. I
> thought I had read on Intel's website that hyperthreading was only in the
> 3.xx ghz P4's?
> -----Original Message-----
> From: Patrick Geoffray [mailto:patrick at myri.com]
> Sent: Wednesday, January 08, 2003 1:38 PM
> To: Henderson, TL Todd
> Cc: 'beowulf at beowulf.org'
> Subject: Re: question about Intel P4 versus Alpha's
> Hi Todd,
> On Wed, 2003-01-08 at 10:49, Henderson, TL Todd wrote:
> > 95-100%cpu utilization range. However, now we have a cluster of P4's
> > when I look at top, it is more like 70-80% cpu usage. This is using the
> > same number of cpu's, the same switch, same code, and same problem for
> > code. The jobs are still completing in about 30-40% less time, so we
> > getting a speed up.
> Is Hyper-threading enabled ?
> Patrick Geoffray, Phd
> Myricom, Inc.
> Beowulf mailing list, Beowulf at beowulf.org
> To change your subscription (digest mode or unsubscribe) visit
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf