Beowulf 1 and 2 (Was: CLIC = Mandrake Cluster Distribution)
josip at icase.edu
Tue Sep 24 15:18:15 EDT 2002
Richard C Ferri wrote:
> The real point that Don Becker was making is that the state of the
> art evolved past Beowulf 1 back in mid-2000, to a Beo 2 model that doesn't
> rely on a full install and therefore isn't subject to version skew -- nodes
> getting out of sync over time.
This "out of sync over time" does not happen by itself. Some hardware,
software or operator glitch causes it, and those are infrequent events.
Detecting version skew and fixing it can easily be done periodically using
simple Linux tools (semi-automatic procedures can help), but if the problem
can be avoided altogether by system design, even better.
> The Beo 2 model also provides single system
> image with regard to process space, and methods to manage remote processes
> from a central point of control.
This is an attractive feature, but in my personal view, not essential. I'm
reasonably happy with separate process spaces and periodic central collection
of machine status data. We operate a heterogeneous cluster built in several
phases with different hardware and different networks, so it makes more sense
for me to consider each class of machines separately. On the other hand, a
central point of control and unified view of the entire cluster open the
possibility of rather sophisticated management.
In my experience, the most time consuming task in operating a Beowulf 1
cluster is the initial node installation or reinstallation after suffering
disk damage. The Beowulf 2 model makes this much easier. The second most
annoying problem is loss of network connectivity (usually due to some hardware
glitch or network driver flakiness under heavy load). The Beowulf 2 model
depends on network connectivity more than the Beowulf 1 model, where one can
operate the problematic node in stand-alone mode and debug the problem. The
third issue on my list is specialized hardware with its own drivers and
daemons, which are usually designed for Beowulf 1 operation but may be
difficult to convert to the Beowulf 2 model. Finally, the issue of process
startup time may concern some people: the Beowulf 1 model usually goes through
standard Linux login, which is typically slower than the Beowulf 2 model,
where all processes are started on the head node and then immediately migrated
to the appropriate compute node.
P.S. Our cluster (almost) never goes down, even during system upgrades.
Robustness comes from redundancy and compartmentalization. We typically
upgrade one section of the system, monitor new software for bugs it
(re)introduced, find fixes, then complete the cluster upgrade. Multiple
system images allow this kind of experimentation. The single system image
approach is much more dependent on this single image working reliably on all
of your hardware immediately. One of the following two approaches may appeal
1) Don't keep all of your eggs in one basket
-->multiple images, multiple versions
2) Keep all of your eggs in one basket and WATCH that basket
-->thoroughly debugged single image, no version skew
P.P.S. Version skew can begin before Linux gets loaded, in BIOS. Diagnosing
that one machine in a hundred becomes flaky under heavy load because its BIOS
settings are subtly different is a very time consuming process... By
comparison, detecting and fixing Linux version skew is easy (start by checking
/var/log/rpmpkgs, automatically generated daily on each machine).
Dr. Josip Loncaric, Research Fellow mailto:josip at icase.edu
ICASE, Mail Stop 132C PGP key at http://www.icase.edu./~josip/
NASA Langley Research Center mailto:j.loncaric at larc.nasa.gov
Hampton, VA 23681-2199, USA Tel. +1 757 864-2192 Fax +1 757 864-6134
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf