Potential Scyld problem
snoz at ksu.edu
Tue Sep 24 13:08:46 EDT 2002
Yes, all I did was just the basic Scyld install.
Art Edwards wrote:
>Thanks for the response. Am I to understand that you simply installed
>Scyld without an Mem commands and that it saw the memory?
>If so, that's really great!
>On Mon, Sep 23, 2002 at 04:29:56PM -0500, Ethan wrote:
>>For what it's worth, I'm runing 27bz-8 on dual Athlon boards with 3 GB
>>of ram each and it all gets recognized.
>>Art Edwards wrote:
>>>I have finally decided to make the big step up to 27bz-8 on a cluster
>>>where each node has 1.5 GB DDR. 27bz-7 would only recognize ~1G of
>>>memory (I'm using Athlon CPU's, if that makes a difference.) Will this
>>>also be true for 27bz-8? If so, can I rebuild the kernel to make the
>>>system recognize 1.5G?
>>>Incidentally, a few weeks ago I asked whether gcc-3.2 would work on
>>>SCYLD. I was concerned about the mpi/beowulf libraries. I compiled from
>>>sources without any problem and the existing 27bz-7 libraries work
>>>without problems for the codes I typically run (GAMESS and QUEST)
>>>Beowulf mailing list, Beowulf at beowulf.org
>>>To change your subscription (digest mode or unsubscribe) visit
>>Industrial Manufacturing & Systems Engineering
>>Kansas State University
Industrial Manufacturing & Systems Engineering
Kansas State University
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf