thermal kill switch
johnb at quadrics.com
Wed Oct 23 15:01:36 EDT 2002
There's also a product from Linux Networx, called an ICE Box (Integrated
Cluster Environment, IIRC). It allows you remote: control of power;
out-of-band access; environmental monitoring.
These have been tried out at LLNL, who have a couple of open source tools
that support it (see http://www.llnl.gov/linux/chaos/). On their first time
out in the big, bad world (when I saw them) there was the odd minor problem,
but that was before it was a 'product' (and they're on rev 2.x now I think).
Don't know how much they cost.
T: +44 (0)117 9155500
F: +44 (0)117 9075395
E: johnb at quadrics.com
> -----Original Message-----
> From: Andre Lehovich [mailto:andrel at U.Arizona.EDU]
> Sent: 23 October 2002 02:02
> To: beowulf at beowulf.org
> Subject: thermal kill switch
> We had the air-conditioning fail yesterday. Caught it in
> time to shut down by hand, but we won't be so lucky next
> time. RGB's book recommends a thermal kill switch, but
> doesn't give details on implementation. One obvious idea is
> to have a daemon monitor lm-sensors and shutdown each node
> as it gets too hot. This is easy and cheap.
> But, is there anything better? We have not yet had the
> electric and cooling contractors refit our server room. Is
> there anything we should have them install during the
> rewiring? What are the pros/cons of a room-wide kill switch
> vs. the lm-sensors approach?
> Beowulf mailing list, Beowulf at beowulf.org
> To change your subscription (digest mode or unsubscribe)
> visit http://www.beowulf.org/mailman/listinfo/beowulf
Beowulf mailing list, Beowulf at beowulf.org
To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
More information about the Beowulf